Pre-Bound Ebif Passthrough (No Dpi) - Imagine communications Selenio BNP 2xr User Manual

ETV Binary Interchange Format
Figure 173. Program with placeholders groomed - ESs grayed out
Note: When creating Placeholder ETV ESs, two new descriptor rules with default values will be created
for each ES used as a placeholder. The Descriptor Data information in these rules may be edited,
if necessary. In this case, there will be 4 new descriptor rules (2 for EISS and 2 for EBIF) that are
created in the Manage Descriptor Rules window.
To view the descriptor rules created with the placeholder ESs:
1. From the Outputs panel of the Grooming -> Mapping window, right-click on the program you
just groomed and select Manage Descriptor Rules from the pop-up menu.
The Manage Descriptor Rules window will open, showing two descriptor rules for each ES
placeholder:
Figure 174. Manage Descriptor Rules - EISS & EBIF additions
2. Click Cancel to close the Manage Descriptor Rules window.

Pre-Bound EBIF Passthrough (no DPI)

In pre-bound EBIF passthrough on a non-DPI program, the network stream contains the pre-bound
ETV data streams, and the BNP is configured to play the input ETV streams on the output.
Selenio TM BNP User Guide, Release 3.7.1
- Use Case Configuration Examples
240