Creating Input Transport Streams - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP
- Grooming - Mapping
Viewing ES-Level Input Source
At the Mapping tab screen, use the following procedure to view the input source of a selected
Elementary Stream (ES).
1. Expand the output program to display the ES you wish to view on the Outputs panel.
2. Right-click on the ES in the Outputs panel
the popup menu.
3. Look at the row now highlighted in the Inputs panel, which is the grooming source for the
selected program.
Figure 59.

Creating Input Transport Streams

The information required to create a transport stream (TS) depends on whether you are creating a
transport stream on an input port or an output port, and on the type of TS created. Each TS creation
dialog is described here.
Basic Input Transport Stream Creation
Use the Create GigE Input Transport Stream dialog
input transport stream.
BNP Element Manager Grooming tab -> Mapping tab screen - > Inputs panel -> right-click on an
Menu Path
input port for popup menu -> select Create Transport Stream.
Selenio TM BNP User Guide, Release 3.7.1
Viewing ES-level input source
Highlighted source
(Figure 59), and select View Grooming Source from
(Table 60 and Table 60) to set parameters for an
109