Grooming and PSIP
- Grooming - Mapping
Managing Elementary Streams
Use guidelines provided in the following topics for management of elementary streams:
"Creating an Elementary Stream," next.
•
"Reordering an Elementary Stream" on page 162.
•
"Remapping Elementary Streams" on page 163.
•
Creating an Elementary Stream
Use the Manage Elementary Streams screen
program.
Note:
An ES Type, Stream Type, PID number, Dummy value, and Preconfigured for PMT value can
only be modified when the word "New" appears next to it in the Stream Order column. Once
you click OK to save changes, you will not be able to modify any of these parameters for this
particular stream without deleting the stream and adding it again.
From the Outputs panel of the Grooming -> Mapping tab screen, right-click on a
Menu Path
program and select Manage Elementary Streams from the pop-up menu.
Figure 94.
Manage Elementary Streams
1. At the Manage Elementary Streams screen, click Add ES to add a new elementary stream entry to
the table on display. By default, the new stream is an AC-3 Audio stream (as demonstrated in
Figure
95).
Selenio
TM
BNP User Guide, Release 3.7.1
(Figure
94) to add a new elementary stream to an output
156