Maintenance
- Software Upgrade
Table 87.
Upgrade Software - Configuration Fields (Continued)
Field
Upgrade Log
Reboot chassis after
successful software
upgrade
Upgrading Software in a Redundant Chassis Environment
In a redundant BNP environment, both the active and standby chassis will need to be upgraded. The
Upgrade Software dialog
how to apply your software upgrade parameters—to both active and standby, or only to active or
standby. This dialog also allows you to enable or disable auto-reboot of the system upon completion of
the upgrade. Use the procedure in
BNP Element Manager menu: Maintenance -> Software Upgrade
Menu Path
Selenio
TM
BNP User Guide, Release 3.7.1
Description
Viewing area in which to watch messages during the upgrade. The
upgrade is complete when you see status as 100% installed.
To reboot the chassis automatically, enable this feature; otherwise,
you will have to reboot the chassis manually.
(Figure
137) for redundant BNPs presents options that allow you to define
Table 88
to perform a redundant BNP software upgrade.
188