Show Program List - Imagine communications Selenio BNP 2xr User Manual

Selenio broadcast network processor series
Table of Contents

Advertisement

System Configuration
- Messaging System Configuration

Show Program List

Within each Messaging System zone you can view which active programs have been configured and
enabled for messaging services.
Programs Configured for Messaging Services
When a program is groomed from an input source to an output transport stream, you can specify
which Messaging System Settings are configured (or associated) on a per program basis. A program
can be associated with any or all three Messaging zone types (EAS, Operator and Advanced, and Logo
Overlay). For more information on associating programs for Messaging Zones, see "Managing Output
Transport Streams" on page 113.
Managing Program Activity for Messaging Service Zones
An output program may join or leave a Messaging Service zone at any time. The changes take effect
the next time a message event starts. Once a program has been associated with a Messaging Service
zone, the program can then be enabled or disabled for the specified zone either from the Grooming -
> Mapping screen (see "Managing Output Transport Streams" on page 113) or through the Show
Program List screen.
The Show Program List screen
all ports (GigE and ASI) that are currently enabled for the selected zone. You can use this screen to
enable or disable Messaging Service operation for one or all programs in a zone.
Use any of the following methods to access the Zone Program List:
Configuration tab -> Messaging System tab -> Messaging Zones screen -> right-
click in the zone's row for popup menu --> select Show Program List
OR
Configuration tab -> Messaging System tab -> Logo Overlay Zones screen -> right-
click in the zone's row for popup menu -> select Show Program List.
Menu Path
OR
From the Modify Messaging Zone screen -> click the Show Program List button.
OR
From the Modify Logo Overlay Zone screen - > click the Show Program List button.
Selenio
TM
BNP User Guide, Release 3.7.1
(Figure
46) displays all output programs across all transport streams on
(Figure
46).
89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Selenio bnp 2xr+Selenio bnp 3xr

Table of Contents