Grooming Input Program(S) To Output Dvb Ts - Imagine communications Selenio BNP 2xr User Manual

DVB Conditional Access
2. Click OK to save and use the settings displayed in this screen.
Table 93. Output DVB TS parameters for DVB-CA configuration
Output TS Parameter
a
Unique TS ID
TS Type
Network ID
Original Network ID
Modulation Mode
SDT Source
EIT Source
a. The DVB-CA standard requires a unique pair value of the TS ID and Network ID fields.

Grooming Input Program(s) to Output DVB TS

Use the Configure Program Mapping screen to groom a selected input program for an output DVB
transport stream
From the Inputs panel of the Grooming tab -> Mapping tab screen, select an input
program and drag it to the output DVB created in the Outputs panel -> Configure
Menu Path
Program Mapping screen.
Selenio TM BNP User Guide, Release 3.7.1
- DVB-CA Configuration
Description
Allows you to assign a unique numeric ID to this
transport stream.
• When this option is checked, the TS ID value
placed in this field will be reserved as unique
for the entire chassis.
• When this option is unchecked, a TS ID value
may still be entered, however the value may be
the same as another TS ID, as long as that TS
ID's value has not been reserved as a Unique
TS ID.
The type of stream. The type of stream you
choose determines what other information is
required. Choices are:
MPEG-2, ATSC, SCTE, or DVB.
The Network ID of the current transport stream.
The Network ID from which this stream has
originated.
Use the pull-down menu to select the modulation
mode used for the TS.
• The Modulation Mode information is carried in
the Network Information Table (NIT) of the
input from the CAS vendor.
• Choice between SCTE 64 QAM and SCTE 256
QAM.
Source of the service description table for this
transport stream. If you select N/A then SDT is
not generated for this output TS.
Source of the Event Information Tabled (EIT) for
the programs in this transport stream. If you
select N/A then EIT will not be generated.
Required DVB-CA Value
This field must be checked.
The value in this field must
match that of the CAS.
This field must be set to DVB.
The value in this field must
match that of the CAS.
The value in this field must
match that of the CAS.
The selection in this field must
match that of the CAS, unless
NIT is passed through.
This field must be set to N/A if
SDT is originating from an
external source.
This field must be set to N/A if
EIT is originating from an
external source.
214