Setting Scte 30 And Scte 35 Message Handling - Imagine communications Selenio BNP 2xr User Manual

Digital Program Insertion (DPI)

Setting SCTE 30 and SCTE 35 Message Handling

The BNP is capable of receiving SCTE 30 messages from an ad server and converting those messages
into SCTE 35 messages.
Figure 142. SCTE 30 to SCTE 35 Conversion
The BNP is also capable of forwarding SCTE 35 messages from input streams to output streams during
network time and ad time.
To set SCTE 30 and 35 message handling options:
1. Launch the Element Manager and log in as the administrator as described in "Log in and Access the
BNP Element Manager" on page 25.
2. Select the Grooming -> Mapping window.
3. Groom an input program to an output transport stream as described in "Drag and Drop Grooming"
on page 140.
The Configure Program Mapping window appears.
4. From the Configure Program Mapping window, check either the Forward SCTE 35 Cue or the
SCTE 30 to 35 Conversion box.
Selenio TM BNP User Guide, Release 3.7.1
- Setting SCTE 30 and SCTE 35 Message Handling
B N P B N P
202