Creating Input Psi/Si Table Grooming - Imagine communications Selenio BNP 2xr User Manual

DVB Conditional Access

Creating Input PSI/SI Table Grooming

Use the Create GigE Input Transport Stream screen to begin this configuration.
Access via BNP Element Manager Grooming ->
Mapping window, right-click on an input GigE or ASI
Menu
port and select Create Transport Stream from the
Path
popup menu.
1. At the Create GigE Input Transport Stream screen:
Enter the IP Address, and UDP Port.
-
Click OK to create the transport stream and to dismiss
-
this screen.
2. At Inputs in the Grooming -> Mapping page:
Right-click the TS that you just created, then select the
Create Ghost Program option from the popup menu.
The Create Ghost Program dialog is now presented.
3. At the Create Ghost Program dialog:
Type a name in the Ghost Program: field.
-
Click OK to dismiss the Create Ghost Program
-
dialog.
The new ghost program is now displayed in the Inputs
section of the Grooming -> Mapping page.
4. At Inputs in the Grooming -> Mapping page, right-click
the new ghost program and select Add Elementary
Stream from the popup menu.
The Add Elementary Stream dialog is now presented.
Selenio TM BNP User Guide, Release 3.7.1
- DVB-CA Configuration
217