DVB Conditional Access
Creating Output DVB TS(s) for DVB-CA System
Use the Create Output Transport Stream screen to create a new DVB output stream for a GigE or ASI
port.
From the Outputs panel of the Grooming tab -> Mapping tab screen, right-click on an
ASI port or GigE port, and select Create Transport Stream from the popup menu. At the
Menu Path
Create Output Transport Stream dialog TS Type field, select DVB.
Figure 151. Create Output TS - DVB-CA: GigE port and ASI port
1. Enter parameters for the output stream.
Refer to general guidelines provided in "Creating DVB Output Transport Streams" on page 123
-
to create a new DVB Transport Stream for either a GigE or an ASI port.
For proper encryption operations, ensure that the parameters listed in
-
Selenio
TM
BNP User Guide, Release 3.7.1
- DVB-CA Configuration
GigE Port
ASI Port
Table 93
are configured.
213