Managing Pmt And Es Descriptors; Adding Program Descriptor Rules - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP

- Managing PMT and ES Descriptors

Managing PMT and ES Descriptors
The Element Manager provides the ability to create program descriptor rules that the BNP will apply
when it sends out a Program Management Table (PMT) for a specified output program. The rules allow
for the appending or removal of output stream descriptors on the PMT level and will remain persistent
upon program regrooming.
Use the Manage Descriptor Rules screen
descriptor rules.
From the Outputs panel of the Grooming -> Mapping tab screen, right-click on a
Menu Path
program and select Manage Descriptor Rules from the pop-up menu.
Figure 125. Manage Descriptor Rules window
The Manage Descriptor Rules screen displays details about currently configured rules. Details about
operations you can perform from this screen are described in the following topics:
"Adding Program Descriptor Rules," next.
•
"Editing Program Descriptor Rules" on page 180.
•
"Deleting Program Descriptor Rules" on page 181.
•

Adding Program Descriptor Rules

Use the Add Descriptor Rule dialog
descriptor rule is not applied at the BNP until all steps in this procedure are completed.
Manage Descriptor Rule screen: click Add Rule --> Add Descriptor Rule dialog.
Menu Path
Selenio TM BNP User Guide, Release 3.7.1
(Figure 125) to view, add, edit, and delete program
(Figure 126) to set parameters for a new descriptor rule. A new
177