Pre-Bound Ebif Drop - Imagine communications Selenio BNP 2xr User Manual

ETV Binary Interchange Format

Pre-Bound EBIF Drop

In pre-bound EBIF drop, the network stream contains pre-bound ETV data streams and the BNP is
configured to not play (to drop) the network ETV streams on the output.
Figure 179 shows an example of pre-bound EBIF where the ETV streams are dropped.
Figure 179. Broadcast EBIF disabled
Configuration Steps:
To configure pre-bound EBIF to be dropped:
1. From the BNP Element Manager, click on the Grooming -> Mapping tab.
2. Create an output transport stream, if necessary. (See the section that begins with, "Managing
Output Transport Streams" on page 113 for additional information.)
3. Use the Drag and Drop Grooming
transport stream (oTS), as seen in Figure 176, "Input program (with ETV data) groomed to TS," on
page 241, for example.
Note: In this use case, the input program does contain two ETV elementary streams.
The Configure Program Mapping window will open.
4. In the ETV Configuration section, leave the PIDs Priority set to the default of Ad.
5. In the Component PIDs section, un-check the EISS and EBIF ESs.
The Configure Program Mapping window will look similar to
Selenio TM BNP User Guide, Release 3.7.1
- Use Case Configuration Examples
feature to groom a desired input program to the desired output
Figure 180.
243