Configuring Dvb-Ca For Internal Eis Mode - Imagine communications Selenio BNP 2xr User Manual

DVB Conditional Access

Configuring DVB-CA for Internal EIS Mode

This section contains the configuration requirements necessary when setting up a DVB-CA system that
uses the BNP's internal EIS. Use these steps in addition to those described for "Configuring DVB-CA:
External and Internal EIS Mode" on page 222
The tasks for this configuration are provided in the following topics:
"Step 1, Create Access Criteria List" on page
•
"Step 2, Create SCG" on page
•
"Step 3, Create ECM" on page
•
"Step 4, Join Program and ES to the SCG" on page
•
"Step 5, Verify Scrambling" on page
•
Step 1 Create Access Criteria List
An Access Criteria List is CA system-specific information needed by the ECMG to build an ECM, which is
required only for internal EIS mode configuration.
1. From the CA System tab page, navigate to CAS Name -> Access Criteria List.
2. Right-click on the Access Criteria List folder and select
Create Access Criteria from the pop-up menu.
The Create Access Criteria dialog is now in view and
displays read-only CAS Name and CAS ID fields, which are
based on the information already configured (see also
Create CA System
3. Use the Create Access Criteria dialog to configure the
following parameters:
AC Name field—type an alphanumeric string to define a
-
name that is unique to the chassis.
AC Data field—enter the hexadecimal number, as
-
provided by the CAS.
The AC Data entry is a hex number provided by the CAS,
formatted as follows:
[vendor #] [Unique TS ID] [ECM PID]
For example:
0b04 0003 0bc6
4. Click Apply to create the Access Criteria List.
Viewing the total count of Conditional Access systems
1. From the DVB-CA menu click on the CA Systems tab.
2. Expand the CA Systems folder to display a list of CA Systems.
3. Highlight the Access Criteria List folder to view the TOTAL ACs pop-up
Selenio TM BNP User Guide, Release 3.7.1
- DVB-CA Configuration
231.
233.
section on page 223),
230.
234.
234.
(Figure 167).
230