Grooming The Ghost Program To Output Dvb Ts - Imagine communications Selenio BNP 2xr User Manual

DVB Conditional Access
5. In the Add Elementary Stream dialog:
Change the Stream Category to Data.
-
Match the Stream Type and PID number provided by
-
the CAS.
Click OK to add the elementary stream to the Ghost
-
program and to dismiss this dialog
6. Repeat these steps for every elementary stream provided by
the CAS vendor for which a PSI/SI table must be generated.
Completion of the elementary stream configurations will
result in Inputs display in Inputs display similar to the example
shown at right .

Grooming the Ghost Program to Output DVB TS

1. Groom the Ghost Program you just created above by dragging the program from the Inputs panel
of the Grooming -> Mapping window to the output DVB TS from "Creating Output DVB TS(s) for
DVB-CA System" on page 213.
2. In the Configure Program Mapping window that opens, check the Stay Unreferenced box.
Figure 156. Configure Program Mapping - Ghost Program - DVB-CA
3. Click OK to complete the grooming process.
The Grooming -> Mapping window will look similar to
Selenio TM BNP User Guide, Release 3.7.1
- DVB-CA Configuration
Figure 157 below:
218