Grooming and PSIP
- Working with PIDs
Unreferenced PID Pass Through
Use the steps in this section to create a ghost program with a data ES, and map the unreferenced PID
from a program input such as that shown in
Figure 114. Ghost Program With Unreferenced PID.
1. Drag and drop the ghost program from the Inputs panel of the Grooming -> Mapping window
to the desired output transport stream to present the Configure Mapping Window.
Note the PID number of the component PID (in this case, 115). You will need this when you want to
create a referenced PID mapping.
2. Be sure that the Stay Unreferenced box is checked, and click OK.
The ghost program and its data transport stream with PID of 0x73 (hex conversion from decimal)
appears on both the input and output
been passed through.
Figure 115. Ghost Program Passed Through
Selenio
TM
BNP User Guide, Release 3.7.1
Figure
114.
(Figure
115) panels, which indicates that the stream has
171