Table of Contents
Advertisement
Selenio™ Network Processor
User Guide
UDP/TCP Ports
In addition to input and output ports configured by users, the following public ports are used by SNP.
Function
CCSP Server
SSH
HTTP
CCSP Server
NMOS Node API
SNP Manager
SNP Manager
License Server Console
SEAM Protocol
SOAP
Control Link Configuration
In your browser, enter the IP address of the SNP, not the SNP Manager. PC has to be on the same subnet
as the SNP.
Control Link Bonding
Current Mode
New Mode
DHCP
© 2019 Imagine Communications Corp.
Default Port
Protocol
4050
UDP
22
TCP
80
TCP
4517
TCP
8100
TCP
9091
TCP
9100
TCP
15080
TCP
29100
TCP
42000
TCP
Indicates the currently selected control link mode.
Choose one of the following:
•
Bonded Active/Backup
•
Bonded LACP - Uses Link Aggregation Control Protocol
•
Dual Addresses
Note: You must click Apply for this change to take effect.
This parameter appears when Dual Addresses is chosen above, because
DHCP is allowed in dual address mode only. One interface can be set to
DHCP, while the other interface must be static. Options are:
• None
• Control A
• Control B
Proprietary and Confidential.
Using Selenio™ Network Processor Console
Applicable To
CCSP control interface
Customer Service Troubleshooting
Upgrade/reboot/reset user interface
CCSP control interface
ANWA NMOS IS-04 Node API for third-
party tool SNP management
User interface control
User Interface control
Zenium license server interface
SDNO communication
SOAP control interface
May 2019 | Page 37
Advertisement
Table of Contents
