Viewing Dpi Status - Imagine communications Selenio BNP 2xr User Manual

Digital Program Insertion (DPI)
2. Set your postblack options according to the following table:
Table 91. Postblack Enable Options
Category
Postblack Enable
Options
DPI Splicing
3. Click Apply Configuration.

Viewing DPI Status

Use the System DPI Activity screen
BNP Element Manager main menu: Status -> System DPI Activity
Menu Path
Selenio TM BNP User Guide, Release 3.7.1
- Viewing DPI Status
Field
AD Server Request
AD Underflows
Accurate splicing for non
CUE DPI
(Figure 146) to view the BNP chassis-level DPI activity.
Description/Values
Check this to play postblack that an ad server
specifies be played at the end of an ad. Left
unchecked, the BNP will ignore any postblack
requests from ad servers.
Check this to insert black frames before transitioning
back to the network, when AD underflows. This will
allow a smooth transition between the AD that under
flowed and the network.
Check this to allow BNP to delay or advance the
splicing per current latency on the stream. This feature
is for frame accurate splicing for DTMF based DPI.
205