Referenced Pid Mapping - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP
- Working with PIDs

Referenced PID Mapping

Input Ghost ES PIDs can be groomed by the BNP and referenced as ES PIDs in one or more program in
the output TS. Figure 119
a Ghost Program on the input.
Figure 119. Starting Window for Referenced PID Mapping
1. Drag and drop the input ghost program (in this case: Ghost-Program-1) to the output transport
stream. Be sure the Stay Unreferenced box is checked
The ghost program must be groomed to the output TS first
Note:
as described in
Figure 120. Mapping the Transport Stream
Selenio TM BNP User Guide, Release 3.7.1
shows the starting window with the unreferenced data PID ES created under
Unreferenced data
PID in Ghost
step 4.
Output program to which
the Ghost PID will be
(Figure 120).
(step 1) before creating a dummy PID
174