Removing Chassis Redundancy; Regrooming - Imagine communications Selenio BNP 2xr User Manual

Maintenance

- Removing Chassis Redundancy

Removing Chassis Redundancy
Use the Remove Chassis Redundancy function to tear down the redundant configuration between a
pair of BNPs.
Element Manager main menu -->Maintenance (Alt m)--> Remove Chassis
Menu Path
Redundancy (Alt r)
The BNP Element Manager will query for confirmation of
the removal.
At the Confirmation dialog, click Yes to proceed, or No
to dismiss this dialog.

Regrooming

Regrooming lets you reset all of the programs that are currently configured in Program Redundancy to
their Active Programs. Once initiated, the command will check to see that the active program has been
restored. If the active program has not been not restored, no change will occur to the current state of
the program.
The Regrooming feature resets all programs with a properly detected primary program available.
Note: This feature cannot be used to regroom a selected stream.
To Reset all of Grooming to the Active Chassis
Use the Regroom function to apply a chassis regroom on the active BNP.
Element Manager main menu -->
Menu Path
Selenio TM BNP User Guide, Release 3.7.1
(Alt m)-
Maintenance -> Regroom
(Alt g)
198