User Authentication Server Configuration - Imagine communications Selenio BNP 2xr User Manual

System Configuration
- User Authentication Configuration

User Authentication Server Configuration

Use the Server tab screen
tools you can use to set AAA server parameters.
Menu Path Configuration tab -> User Authentication tab -> Servers tab screen.
Figure 30. User Authentication - Servers
Note: When deleting an AAA server, it may be necessary to first reorder the list of servers so that the
desired server may be deleted in descending order. See also "About AAA Server Order," in the next
section.
About AAA Server Order
The order in which the system attempts to connect to an AAA server is based on the following criteria:
The preferred authentication protocol specified in the Protocol field of the User Authentication -
•
> Global tab;
The current server order as shown in the Order column of the User Authentication -> Servers tab.
•
If the preferred authentication protocol is set to Radius, all Radius servers will be tried first, followed by
TACACS+ servers. If set to TACACS+, all TACACS+ servers will be tried first, followed by RADIUS
servers.
For example, if four AAA servers have been added to the AAA server list (see
specified protocol preference is Radius, the order in which the servers are tried is A, D, B, C.
Selenio TM BNP User Guide, Release 3.7.1
(Figure 30) to view the current AAA server configurations, and to access
Table 27) and the
57