Configuration Tab; Chassis Tab - Imagine communications Selenio BNP 2xr User Manual

BNP Element Manager Basics

Configuration Tab

The Configuration tab provides access to several types of configuration tasks
Table 9. BNP Element Manager Configuration Tab Banks
Tab
Global
Ethernet Control
Port
GigE Port
ASI Ports
User
Authentication
Messaging System
SNMP Trap

Chassis Tab

The BNP Element Manager automatically detects the chassis hardware and provides a graphical display
of the product components and their current states
displayed, as associated with the currently logged in BNP model. The information displayed on this
screen is
Read-only.
•
Available regardless of whether the selected BNP is the active or standby unit
•
standby units, however, some configuration options will not be available
Selenio TM BNP User Guide, Release 3.7.1
- Configuration Tab
Use
View and set parameters to be applied to the BNP system. These settings control
functions such as system time source, chassis redundancy, DPI ad parameters and
splicing.
See "Global Chassis Configuration" on page 37.
Configure the BNP to use either a static IP address or that obtained via BOOTP/DHCP.
This page provides all network addresses, and the chassis MAC address, currently
used by the BNP's Ethernet Control Port.
See also "Ethernet Control Port Configuration" on page 43.
Use the GigE Port tab screen to define IP, subnet, and gateway addresses for each BNP
GigE port, and to manage port mirroring and port negotiations.
See also "GigE Port Configuration" on page 44
Use the ASI Ports tab screen to set ASI port directions, as either Input or Output.
See also "ASI Port Configuration" on page 47.
Set parameters for BNP Element Manager user accounts.
See also "User Authentication Configuration" on page 49.
Use the Messaging System tab to define messaging zones and/or logo overlay zones.
See also "Messaging System Configuration" on page 60.
Use the SNMP Trap tab to set up to eight IP addresses, which identify the SNMP traps
to be used by the BNP.
See also "SNMP Trap Agent Configuration" on page 92.
(Figure 14). Both the front and rear panels are
(Table 9).
(Table 10). For
31