Drag And Drop Grooming - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP
- Grooming - Mapping
Deleting Output Streams and Programs
Use the Delete function to remove a stream or program from the BNP.
1. From the Grooming -> Mapping tab screen, right-click on a TS and select one of the following
options from the popup menu:
Delete Transport Stream, to remove the individual output stream from the ASI or GigE
-
interface.
Delete All Programs, to remove all output programs from the ASI or GigE interface.
-
2. At the confirmation dialog, click Yes.
Figure 85. Delete Output Transport Stream or Program

Drag and Drop Grooming

You can groom programs by using the drag and drop method to associate input transport streams,
programs, or data elementary streams with selected output elements
transport stream to a port, or over an existing transport stream. You can drag a program to a transport
stream, or over an existing program. You can also drag an elementary stream to a program or to an
existing elementary stream..
Table 72. Drag and drop grooming
Drag and Drop
Components
Transport Stream to
Transport Stream
Transport Stream to
GigE Port
Program to Transport
Stream
Program to Program
Elementary Stream to
Elementary Stream
Elementary Stream to
Program
Caution: If you replace one transport stream with another, the original will be completely deleted.
Selenio TM BNP User Guide, Release 3.7.1
Grooming Behavior
Deletes all current programs and replaces them with the dragged Transport Stream
The entire Transport Stream is copied to the output port
The program is created in the Transport Stream; the Configure Program Mapping
window appears, allowing you to modify the program mapping information
See also "Program to Transport Stream Grooming" on page 141.
Deletes the existing program and replaces it with the dragged program
See also "Program to Program Grooming" on page 142.
For EBIF, EISS, and regular data streams only; deletes existing ES and replaces it
with the dragged ES. Opens the Configure Elementary Stream Mapping window.
Only supports replacing the ES, not modification.
See also "Input Elementary Stream to Output Elementary Stream Grooming" on
page 150
For EBIF, EISS, and regular data streams only; adds the dragged ES to the program.
If the ES already exists in the program, the dragged ES will replace the existing ES.
See also "Elementary Stream Grooming" on page 148.
(Table 72). You can drag a
140