Creating Dvb Output Transport Streams - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP
- Grooming - Mapping
Creating an SCTE Output Transport Stream on a GigE Port
Go to the SCTE version of the Create Output Transport Stream dialog
From the Outputs panel of the Grooming tab -> Mapping tab screen, right-click on a GigE port
Menu Path and select Create Transport Stream from the popup menu. At the Create Output Transport
Stream dialog TS Type field, select SCTE.
Figure 71. Create Output Transport Stream (GigE)—SCTE
1. At the Create Output Transport Stream dialog, use guidelines from
information in the remaining fields.
2. Click OK to save your settings and to place the new SCTE transport stream in the Outputs panel of
the Grooming ->Mapping tab screen, beneath the selected GigE port.

Creating DVB Output Transport Streams

Use the Create Output Transport Stream screen to set parameters for Digital Video Broadcast (DVB)
transport streams, as described in the following topics:
"Creating a DVB Output Transport Stream on a GigE Port," next.
•
"Creating a DVB Output Transport Stream on an ASI Port" on page 124.
•
Creating a DVB Output Transport Stream on a GigE Port
Go to the DVB version of the Create Output Transport Stream dialog
From the Outputs panel of the Grooming tab -> Mapping tab screen, right-click on a
GigE port and select
Menu Path
Output Transport Stream dialog TS Type field, select DVB.
Selenio TM BNP User Guide, Release 3.7.1
Create Transport Stream
(Figure 71):
Table 64 to provide port
(Figure 72):
from the popup menu. At the Create
123