Creating A Fat Asi Port Output Transport Stream - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP
- Grooming - Mapping
2. Click to apply any changes.
OK
Deleting a NIT
Use the Delete function to remove a NIT from the BNP.
From the main BNP Element Manager
menu, select Maintenance (Alt m)->
Setup Network Information Table (NIT)
Menu Path
-> Setup Network Information Table
(NIT) dialog, click Delete

Creating a FAT ASI Port Output Transport Stream

Use the Create Output Transport Stream (FAT ASI) dialog
for up to four FAT ASI groups.
Note: The following restriction applies when creating a FAT ASI transport streams:
Two FAT ASI transport streams per card are allowed:
one at one of the first three ports, and one at the last port.
Right-click on an ASI port and select Create Transport Stream (FAT ASI) from the
Menu Path
popup menu.
Selenio TM BNP User Guide, Release 3.7.1
(Figure 76 and Table 67) to set parameters
128