Creating Input Ts(S) For Dvb-Ca System - Imagine communications Selenio BNP 2xr User Manual

DVB Conditional Access
ASI Port Input and Output Configuration
Use the ASI Ports tab page to manage the ASI ports for the BNP. Note that an ASI port cannot be used
for simultaneous input and output: only one direction per port may be selected.
Access via BNP Element Manager Configuration tab -> ASI Ports tab page.
Menu Path
Figure 150. Configure ASI - DVB-CA
1. At the selection field for any particular ASI, select either Input or Output.
2. Click Apply Configuration to save changes.

Creating Input TS(s) for DVB-CA System

Use the Create GigE Transport Stream screen to create an input transport stream for which programs
are to be encrypted.
Access via BNP Element Manager Grooming ->
Mapping window, right-click on an input GigE or
Menu Path
ASI port and select Create Transport Stream from
the popup menu.
1. Enter the TS Name, IP Address, and UDP Port of the Input
TS for the programs to be encrypted.
Guidelines for entering parameters in this screen are
provided in "Creating Input Transport Streams" on page 109.
2. Click OK to save and use the settings displayed in this
screen.
Selenio TM BNP User Guide, Release 3.7.1
- DVB-CA Configuration
212