Viewing Grooming Details; Scheduling Grooming - One Time Event - Imagine communications Selenio BNP 2xr User Manual

Grooming and PSIP
- Grooming - Mapping

Viewing Grooming Details

1. In the Outputs panel of the Grooming -> Mapping window, select the transport stream or
program whose details and schedule you want to see.
2. Right-click and select
The BNP Element Manager will display the currently defined mapping and scheduling window. If
you chose to view grooming for the whole TS, all grooming for the programs in that TS will be
displayed; if you chose to view grooming for a specific program, only the grooming for that
program will appear.
Figure 90.
The presence of ES-level grooming is indicated by a black asterisk (*) next to the relevant ES in the
Component PIDs section of the Current Program Mapping and Schedule window.
3. Click
Refresh
Note: In Figure
from the NTP server. Your PC that is used for configuration may show a different time. This "PC
time" should be disregarded; the start and stop times you enter will be referenced to the NTP
server.

Scheduling Grooming - One time event

Note: It should be noted that proper use of BNP's scheduled grooming feature depends on an NTP
server as an accurate timing source. Additionally, when scheduling grooming, only a single event
can be scheduled, rather than an ongoing occurrence.
Selenio TM BNP User Guide, Release 3.7.1
Display Grooming
Grooming detail display - TS
to refresh the view, or
90, the times specified in the Grooming Schedule section (see
.
to close the window.
Cancel
Indicates ES-level grooming
Figure 1 for a sample) are
151