Selenio™ Network Processor
User Guide
Servicing
Removing the Front Panel
The front panel can be removed and replaced, for example if fans or lights fail on the panel.
The instructions for removing both SNP-FPNL-ASSY for SNP-GW-3GX32 frames or SNP-FPNL-HS-QF for
SNP-GW-3GX32-HS-QF frames are the same. The pictures below display the procure using a SNP-FPNL-
ASSY and a SNP-GW-3GX32 frame.
1. Remove power from the SNP using the power switch on the left.
Use a screwdriver to release the thumb screws at the left and right ends of the front panel.
2. Gently slide the entire front panel away from the chassis.
© 2019 Imagine Communications Corp.
Proprietary and Confidential.
May 2019 | Page 139