Daikin MD5 Operation Manual page 35

Table 18 continued: Group 34: Panel Display
3407 OUTPUT1 MAX
Sets the maximum value displayed for the first display parameter.
Note: Parameter is not effective if parameter 3404 OUTPUT1 DSP FORM = 9 (DIRECT) .
3408 SIGNAL 2 PARAM
Selects the second parameter (by number) displayed on the control panel . See parameter 3401 .
3415 SIGNAL3 PARAM
Selects the third parameter (by number) displayed on the control panel . See parameter 3401 .
3418 OUTPUT3 DSP FORM
Defines the decimal point location for the third display parameter. See parameter 3404.
3420 OUTPUT3 MIN
3421 OUTPUT3 MAX
Sets the maximum value displayed for the third display parameter . See parameter 3407 .
www .DaikinApplied .com 35
P
araMeTers
Depends on 1000 .0
—
selection (%SP)
100...178 1 104
100...178 1 120 (AI 1)
0...9 1 5 (+0 .0)
Depends on
— 0 .0 mA
selection
Depends on
— 20 .0 mA
selection
OM 1191 • MD5 VFD