Daikin MD5 Operation Manual page 10

Figure 4: Selecting an application macro
To select a macro, follow these steps:
1 Select MENU to enter the main menu .
Select ASSISTANTS with the UP/DOWN buttons and
2
select ENTER .
3 Scroll to APPLICATION and select ENTER .
Select a macro with the UP/DOWN buttons and select
4
SAVE .
Restoring defaults
To restore the factory default settings, select the application
macro HVAC Default .
Control wiring
Each macro has specific requirements for control wiring. For
general details about the MD5 control wiring terminals, see
Control Terminal Descriptions on page
requirements are included with each macro description .
OM 1191 • MD5 VFD
85. Specific wiring
10
a M
PPliCaTion aCros
www .DaikinApplied .com