Mitsubishi NZ2GF2B-60DA4 User Manual page 113

3.
Display the "CC IE Field Configuration" window and configure the configuration and station
number of the slave station as follows.
4.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration]
5.
Display the refresh parameter setting window and configure the setting as follows.
6.
Write the set parameter to the CPU module of the master station and reset the CPU module, or turn
on from off the power supply.
[Online] [Write to PLC...]
button
[Close with Reflecting the Setting]
button
RESET
or Power OFF ON
CHAPTER 9 PROGRAMMING
111
9