Mitsubishi NZ2GF2B-60DA4 User Manual page 32

signal direction: D/A converter module →
Module
type
Device
number
RX10 Use prohibited
RX11 Use prohibited
RX12 Use prohibited
RX13 Use prohibited
RX14 Use prohibited
RX15 Use prohibited
RX16 Use prohibited
RX17 Use prohibited
Main
module
RX18 Use prohibited
RX19 Use prohibited
RX1A Use prohibited
RX1B Use prohibited
RX1C Use prohibited
RX1D Use prohibited
RX1E Alert output signal
External power supply monitor state flag (for
RX1F
extension output module)
RX20
Extension Remote input (RX) of the connected extension
to
module 1 module is assigned.
RX2F
Do not use any "Use prohibited" remote I/O signals. If any of the signals are used, correct operation of the module cannot be
guaranteed.
(1) Remote I/O signal of the extension module
The remote I/O signal differs depending on the model of the extension module.
• Extension I/O module
Refer to the following.
CC-Link IE Field Network Remote I/O Module User's Manual
30
Remote input
Master/local module
Description
Remote output
signal direction: Master/local module →
D/A converter module
Device
number
RY10 CH1 Output enable/disable flag
RY11 CH2 Output enable/disable flag
RY12 CH3 Output enable/disable flag
RY13 CH4 Output enable/disable flag
RY14 Use prohibited
RY15 Use prohibited
RY16 Use prohibited
RY17 Use prohibited
RY18 Use prohibited
RY19 Use prohibited
RY1A Use prohibited
RY1B Use prohibited
RY1C Use prohibited
RY1D Use prohibited
RY1E Alert output clear request flag
External power supply monitor request flag (for
RY1F
extension output module)
RY20
Remote output (RY) of the connected extension
to
module is assigned.
RY2F
Description