Mitsubishi NZ2GF2B-60DA4 User Manual page 19

(6) Error detection and monitoring available
When a digital value exceeds the range set in advance, an alert is detected. Thus, an error of digital value can be
monitored and outputs of a digital value can be limited.
(7) Output available without influence from the sequence scan or link scan
An error status or alert status can be output from the extension output module by using the external signal
assignment function when an error or alert occurs.
The sequence scan or link scan does not influence this output.
D/A converter module
Extension output module
(8) Various installation methods
The module can be installed in six directions using a DIN rail.
DIN rail
Horizontal installation
An error signal occurred in the D/A
converter module can be output to
the extension output module directly.
An error has
occurred.
Downward installation
Vertical installation
Upward installation
CHAPTER 1 D/A CONVERTER MODULE
Error lamp
(external device)
Programming is not necessary to
turn on an error lamp when an error
occurs.
Horizontal installation
(upside down)
1
17