Mitsubishi NZ2GF2B-60DA4 User Manual page 23

No. Name
PORT1 connector for CC-Link IE Field Network (RJ45 connector)
P1
Connect an Ethernet cable. (
There are no restrictions on the connection order of the cables for the "P1" connector and "P2" connector.
ON
L ER
LED
(red)
OFF
3) LINK
ON Linkup in progress.
LED
OFF Linkdown in progress.
(green)
PORT2 connector for CC-Link IE Field Network (RJ45 connector)
P2
Connect an Ethernet cable. (
There are no restrictions on the connection order of the cables for the "P1" connector and "P2" connector.
L ER LED (red)
(Same as the "P1" connector)
LINK LED (green)
Terminal block for
4) module power supply A terminal block to connect the module power supply (24VDC) and FG.
and FG
5) DIN rail hook A hook to mount a module on a DIN rail.
Terminal block cover Covers for preventing electric shock while the power is on.
6)
Terminal block for
A 2-piece screw terminal block for connecting to the external device.
analog output signals
7) SET/SEL button
Select the setting target by pressing the
8) +/- button Select the analog output value by pressing the + button or - button in the offset/gain setting mode.
• The module has received abnormal data.
• The module is performing loopback.
• The module has received normal data.
• The module is not performing loopback.
Application
Page 54, Section 6.5)
Page 54, Section 6.5)
button or button in the offset/gain setting mode.
CHAPTER 2 PART NAMES
21
2