Mitsubishi NZ2GF2B-60DA4 User Manual page 110

(2) Programming condition
This program enables the D/A conversion in CH1 and CH2 of the D/A converter module and outputs the written
digital values in analog.
If an error or alert occurs, a digital signal is output from the extension output module.
(3) Initial setting description
External signal assignment function
D/A conversion enable/disable setting
Analog HOLD/CLEAR setting
Alert output function
Scaling function
Set the initial values for the parameters other than the above.
108
Setting item
Alert output signal assignment
Error flag assignment
CH1 D/A conversion enable/disable setting
CH2 D/A conversion enable/disable setting
CH1 Analog output HOLD/CLEAR setting
CH2 Alert output setting
CH2 Alert output upper limit value
CH2 Alert output lower limit value
CH1 Scaling enable/disable setting
CH1 Scaling upper limit value
CH1 Scaling lower limit value
Setting value
0x0022
0x0024
0: Enable
0: Enable
1: HOLD
0: Enable
16000
10000
0: Enable
32000
0