Mitsubishi NZ2GF2B-60DA4 User Manual page 90

1.
Set "Parameter write" for "Method selection".
"CC IE Field Configuration" window
[CC IE Field Configuration]
2.
Set "CH
3.
Set "CH
4.
Set values for "CH
5.
Set "-25" for "CH
88
[Parameter Processing of Slave Station]
D/A conversion enable/disable setting" to "0: Enable".
Scaling enable/disable setting" to "0: Enable".
Scaling lower limit value" and "CH
Shifting set value (RWw6 to RWw9)".
Select a D/A converter module in "List of stations"
Scaling upper limit value".