Mitsubishi NZ2GF2B-60DA4 User Manual page 132

(3) When the ON/OFF status of the remote output (RY) set in the external signal
assignment function does not match the signal of the assigned function.
Check item
Is the setting of the external signal assignment
function correct?
130
Check that the following settings are not used in the external signal assignment
function.
• Alert output signal assignment (address: 0004
• Error flag assignment (address: 0005
• Warning flag assignment (address: 0006
Action
) ( Page 140, Appendix 3 (1))
H
) ( Page 141, Appendix 3 (2))
H
) ( Page 142, Appendix 3 (3))
H