Table of Contents
Advertisement
(2) Error flag assignment (address: 0005
Error flag (RXA) is assigned to the remote output (RY) of the extension output module using the external signal
assignment function. When a moderate or major error occurs, the assigned remote output (RY) turns on.
(a) Setting range
The remote output (RY) number of the extension output module, counted from the start remote output (RY)
number (0000
) of the main module, is set.
H
The following is an example for assigning Error flag (RXA) to the remote output (RY) number, 4
Ex.
extension output module.
The remote output (RY) number, 4
the main module.
Thus, set 24
for Alert output signal assignment (address: 0004
H
(b) Enabling the setting
Turn on and off Initial data setting request flag (RY9).
(c) Default value
The default value is set to No assignment (FFFF
If a value out of the setting range is set, an error occurs. The error code (0173
flag (RXA) turns on, and the ERR. LED turns on. The operation is performed in the previous setting.
Main module
0
to
1F
H
, is 24
when counted from the start remote output (RY) number of
H
H
H
)
H
Extension module
0
to 4
to
F
H
H
H
20
to 24
to
2F
H
H
H
H
).
H
).
) is stored in Latest error code (RWr0), Error
H
APPENDICES
, of the
H
A
141
Advertisement
Table of Contents
Troubleshooting
