Mitsubishi NZ2GF2B-60DA4 User Manual page 96

(5) When the shift function is set enabled
When a value is set to CH
the target for the alert.
(6) Setting procedure
1.
Set "Parameter write" for "Method selection".
"CC IE Field Configuration" window
[CC IE Field Configuration]
2.
Set "CH
3.
Set "CH
4.
Set values for "CH
CH Alert output upper limit value
CH Alert output lower limit value
94
Shifting set value (RWw6 to RWw9), the value with the shifting set value added is
D/A conversion enable/disable setting" to "0: Enable".
Alert output setting" to "0: Enable".
Alert output upper limit value" and "CH
Item
Select a D/A converter module in "List of stations"
[Parameter Processing of Slave Station]
Setting range
-32768 to 32767
Alert output lower limit value".