Mitsubishi NZ2GF2B-60DA4 User Manual page 98

*1 A warning is in the following state five seconds after the error cause is removed.
• Warning flag (RX7) turns off.
• Latest warning code (RWr1) is cleared.
• The ERR. LED turns off.
*2 The alarm is not automatically cleared. Latest warning code (RWr1) is cleared when the other minor errors are cleared in
the alarm status.
The warning codes can be checked in the error history on GX Works2. For the error history, refer to the following.
• Checking by executing a command of the slave station (
• Error history
Operation to clear Station number switch changing error (error code: 0940
Ex.
Station number setting
switch
Warning flag (RX7)
Latest warning code
(RWr1)
ERR. LED
Remote READY
(RXB)
For the method for clearing an alarm, refer to the following.
• Digital Value Range Check Function (
• Alert Output Function (
96
(address: 0A00 to 0AEF ) (
H H
Controlled by the D/A converter module
ON
OFF
0
(station number switch changing error)
OFF
ON
Page 89, Section 8.8)
Page 92, Section 8.9)
Page 116, Section 11.1 (1))
Page 148, Appendix 3 (14))
)
H
OFF
0940
H
0
Flashing OFF
5 seconds