(3) Setting procedure
1.
Set "Parameter write" for "Method selection".
"CC IE Field Configuration" window
[CC IE Field Configuration]
2.
Set "CH
3.
Set "CH
4.
Set values for "CH
CH
Scaling upper limit value
CH
Scaling lower limit value
● Even if the scaling upper limit value and the scaling lower limit value are set so that the change is larger than the
maximum resolution described in the performance specifications, the resolution will not increase.
● Scaling settings must meet the following condition:
Scaling upper limit value > Scaling lower limit value
80
[Parameter Processing of Slave Station]
D/A conversion enable/disable setting" to "0: Enable".
Scaling enable/disable setting" to "0: Enable".
Scaling lower limit value" and "CH
Item
Select a D/A converter module in "List of stations"
Scaling upper limit value".
Setting range
-32000 to 32000