Appendix 3 Details Of Remote Buffer Memory Areas - Mitsubishi NZ2GF2B-60DA4 User Manual

Appendix 3
This section describes the details of remote buffer memory areas of the D/A converter module.
(1) Alert output signal assignment (address: 0004
Assign Alert output signal (RX1E) to Remote output (RY) of the extension output module using the external signal
assignment function. When an alert occurs, assigned Remote output (RY) turns on.
(a) Setting range
The remote output (RY) number of the extension module, which is counted from the start remote output (RY)
number (0000
The following is an example for assigning Alert output signal (RX1E) to the remote output (RY) number,
Ex.
2 , of the extension output module.
H
The remote output (RY) number, 2
the main module.
Thus, set 22
(b) Enabling the setting
Turn on and off Initial data setting request flag (RY9).
(c) Default value
The default value is set to No assignment (FFFF
If a value out of the setting range is set, an error occurs. The error code (0172
flag (RXA) turns on, and the ERR. LED turns on. The operation is performed in the previous setting.
140
Details of Remote Buffer Memory Areas
) of the main module, is set.
H
Main module
0 to
H
H
for Alert output signal assignment (address: 0004
H
)
H
Extension module
0 to 2 to
H H
1F 20 to 22 to
H H H
, is 22 when counted from the start remote output (RY) number of
H
).
H
F
H
2F
H
).
H
) is stored in Latest error code (RWr0), Error
H