Operation And Maintenance - MICRO-EPSILON capaNCDT 6200 Operating Instructions Manual

Operation and Maintenance

9.
Please take care of the following:
Changing the target or very long operating times can lead to slight reductions in the operating quality (long
term errors). These can be eliminated by recalibration.
> Static discharge
> Danger of injury
If the controller, the sensor or the sensor cable is
defective, please send us the affected parts for
repair or exchange. If the cause of a fault cannot
be clearly identified, please send us the entire
measuring system to:
capaNCDT 6200
Operation and Maintenance
Make sure that the sensor surface is always clean.
Switch off the power supply before cleaning.
Clean with a damp cloth; then rub the sensor surface dry.
Disconnect the power supply before touching the sensor surface.
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0
Fax +49 (0) 8542 / 168-90
info@micro-epsilon.de
www.micro-epsilon.com
Page 84