Safety; Symbols Used; Warnings - MICRO-EPSILON capaNCDT 6200 Operating Instructions Manual

Safety

1.
System operation assumes knowledge of the operating instructions.
1.1
The following symbols are used in these operating instructions:
i
1.2
Disconnect the power supply before touching the sensor surface.
> Risk of injury
> Static discharge
Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.
> Risk of injury
> Damage to or destruction of the sensor and/or controller
Avoid shocks and impacts to the sensor and controller.
> Damage to or destruction of the sensor and/or controller
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the sensor and/or controller
capaNCDT 6200
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
Indicates tip for users.

Warnings

Page 7