MICRO-EPSILON capaNCDT 6200 Operating Instructions Manual page 75

Ethernet Interface
Operating Menu, Set Controller Parameter
Preliminary Notes to the Settings
You can program the capaNCDT 6200 at the same time in two different kinds:
- Using a web browser via the sensor web interface
- With ASCII command set and terminal program via Ethernet (Telnet)
Login, Changing User Level
Assigning passwords prevents unauthorized changes to controller settings. Password protection is not en-
abled as a factory setting. After the controller has been configured, you should enable password protection.
i
User can do the following:
Password required
View settings
Change settings, change password
Start measuring
Scale graphs
Fig. 27 Permissions within the user hierarchy
Login
Logged in as
Password
Fig. 28 Changing to professional level
capaNCDT 6200
A firmware update will not change the custom password.
User
User Professional
no yes
yes yes
no yes
yes yes
yes yes
Enter the password into the
word
confirm.
To change to user mode, click the
Submit
Logoff
Pass-
Submit
box and click to
button.
Page 75