Operation Using Ethernet; Requirements - MICRO-EPSILON capaNCDT 6200 Operating Instructions Manual

Hide thumbs Also See for capaNCDT 6200:
Table of Contents

Advertisement

Ethernet Interface
6.5
Dynamic web pages are generated in the controller which contain the current settings of the controller and
the peripherals. Operation is only possible while there is an Ethernet connection to the controller.
6.5.1
You need a web browser with HTML5 support (e.g. Mozilla Firefox  3.5 or Internet Explorer  10) on a PC
with a network connection. To support a basic first commissioning of the controller, the controller is set to a
direct connection.
If you have configured your browser to access the internet via a proxy server, in the browser settings you will
need to add the IP address of the controller to the list of addresses which should not be routed through the
proxy server. The MAC address of the unit can be found on the nameplate of the controller.
" Javascript" must be enabled in the browser so that measurement results can be displayed graphically.
capaNCDT 6200

Operation Using Ethernet

Requirements

Page 72

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the capaNCDT 6200 and is the answer not in the manual?

Questions and answers

Table of Contents