Message Presentation - Siemens Cerberus CS1140 Manual

B3Q580 Text display terminal and B3Q590/B3Q595 Text control terminal
54.6

Message presentation

Mode
0
nn%<---------- standard text ---------->
<--- last line of customer text ---->
1
nn%<---- standard text -----> <-tx1->xxx
2
<--- last line of customer text ---->
3
4
nn%<---------- standard text ---------->
AAAA xx
5
6
nn%<---- standard text -----> <-tx1->xxx
AAAA xx
7
8
nn%<-------- customer text 1 ---------->
<-------- customer text 2 ---------->
9
10
nn%<---- customer text 1 ---> <-tx1->xxx
<--------- customer text 2 --------->
11
nn%<-------- customer text 1 ---------->
12
<-------- customer text 2 ---------->
nn%<---- customer text 1 ---> <-tx1->xxx
A <--------- customer text 2 --------->
13
nn%<-------- customer text 1 ---------->
B
<-------- customer text 2 ---------->
54.7 Country specific configuration data
234
Building Technologies
Fire Safety & Security Products
The AlgoPilot provides 3 text lines within the LCD per alarm message. B3Q580
and B3Q590/B3Q595 only have a two–line display. The messages at the
B3Q580/590/595 must therefore be reduced to a format of only 2 text lines, in or-
der to meet different requirements. There are 14 display modes available (mode
0....13 selectable via AlgoWorks). The modes in the detail may slightly deviate de-
pending on EP, see Online-Help of the corresponding AlgoWorks.
Display B3Q580/590/595
SSSS xxx ZZZZ xxx
SSSS xxx ZZZZ xxx
Supported character set
ASCII (...127) + 8 individual characters defined per country
supports most European languages, Hebrew and Cyrillic are explicitly excluded
Local configuration
all national configuration data is locally available (EPROM in B3Q580/590/595)
the required parameters are selected by 'country code' which is received with
each 'system startup' and after each local 'power down'
Parameters
8 defined national characters
national standard texts for 'local mode' during communication break
format for date and time display
Plan ref. no.
on alarm
●
●
EEEE xx
●
EEEE xx
●
●
●
Special function:
Key acckn. + reset disabled while remote transmission
–
is active (RT)
– buzzer silenced when RT becomes active
Special function:
– different display mode
A = on alarm
B = on fault
CSX no. fault messages
●
●
●
● ●
●
● ●
●
●
001260_k_en_--.doc
02.2005