About This Document - Siemens Cerberus CS1140 Manual

1

About this document

Group of persons
Project Manager
Installation personnel
Commissioning personnel
Product Specialist
Building Technologies
Fire Safety & Security Products
Purpose
This document describes the function of hardware modules of the control unit
CS1140. The consistent adherence to these instructions ia a prerequisite for a safe
application.
Scope
This document contains information for all modules CS1140, valid for all software
versions.
Target groups
This product documentation and the work instructions are aimed at the following
persons, who have a particular function and have the corresponding training and
qualification.
Activity
The project manager is responsible for the local
project management. His co-ordinates the schedules
of all groups of people working on a project as well
as resources. He also continuously obtains the
technical information required for project realization.
They install product, device or system components
and subsequently carry out a general performance
check.
The configuration of the products, devices or sys-
tems for specific customers at the place of installa-
tion.
They check serviceability and officially clear the
product, device or system for use by the operator /
customer. They are also responsible for trouble-
shooting.
He programs and parameterizes the product to
comply with the requirements for specific countries
and customers. He provides support in the solving of
technical problems and supports all groups of people
when product faults arise.
Reference documents
Document
Information in
Installation housing H26..../H28...
1393
1971 Installation housing H37...
Installation housing H38...
1273
Installation housing H47...
1274
Installation housing H67...
1275
Operating instructions AlgoPilot B3Q4../560 EP5
1033, 003128, 003129
008728 Operating instructions AlgoPilot B3Q4../560 EP7F–Z1
004598 Operating instructions AlgoPilot B3Q6../565 EP7F–Z1
Operating instructions extinguishing section B3Q4.. EP7F
005590
Operating instructions extinguishing section B3Q6.. EP7F
005113
Compact control unit CI1145 EP5
1577
Compact control unit CI1145 EP7F–Z1
008727
1076 Planning (CS1140 'Modular') EP5
008725 Planning (CS1140 'Modular') EP7F–Z1
Commissioning EP5
1249
Commissioning Hardware EP7F–Z1
008726
Commissioning Extinguishing EP5
1456
Commissioning Extinguishing EP7F
005109
1669 Paging interface card K3I090, Technical manual
1099 Modules overview
Connection factors of detection lines
825
'Interactive detection line' connection factors
1102
Connection factors for fire detection systems collective, AnalogPLUS, interac-
001508
tive
About this document
Qualification
He has had the technical training appropriate to
his function and the size of a project or the
product line used in the project and has at-
tended the training courses for project manag-
ers at the supplier's works.
Professional training in the field of building
automation or electrical installations.
They have had the professional training appro-
priate to their function and to the commission-
ing of the products, systems and devices and
have attended the technical training courses for
commissioning personnel.
He has had technical training appropriate to his
function and has attended the technical training
courses for product specialists at the supply
plant.
001260_k_en_--.doc
11
02.2005