Programming a Tax Table
1. Move the mode key to the P position to display the Program Mode menu.
2. Use the CHARGE1 and the CHARGE2 keys to select "7.TAXES" (or press 7 to go
3. Enter the Tax number you want to program and press the CASH; the tax Descriptor field
4. Press CASH to enter a descriptor if desired, then press CASH or just Press CHARGE1
5. At the TAX TYPE field, use the CHARGE1 and the CHARGE2 keys to select the
6. Press CASH to view the 'NON-TAX AMOUNT' entry field:
7. Enter maximum non-taxable amount then Press CASH; The '1
8. Enter the amount of the first tax that will be charged (typically 1¢) then Press CASH;
9. Enter the first Non-Repeat Break and press CASH.
10. Continue entering all the Non-Repeat Breaks, when you have entered the last Non-Repeat
11. Enter the first Repeat Break and press CASH;
12. Continue entering all the Repeat Breaks, when you have entered the last Repeat Break
13. Continue to program additional taxes or press CLEAR to return to the PROGRAM
Sam4s ER-260EJ/256EJ OP Manual v1.20
to the option directly.) Press CASH to view the Tax Number selection screen.
ENTER TAX#
(1-4)
displays:
TAXES
1.DESC :
[TAX3]
to select the TAX TYPE:
TAXES
2.TYPE
[TAX TABL E]
TAX TABLE; press CASH key to confirm. The tax 'RATE' field displays:
TAXES
3.RATE
[0.000]
TAX TABLE3
NONTAX AMT 0.10
displays:
TAX TABLE3
1
S T
TAX AM 0. 01
The 'NON-REPEAT BREAK' entry filed displays:
NON-REPEAT BREAK
[1]
Break press CASH; at the next field don't enter a value, just press CASH. The 'REPEAT
BREAK' entry field displays:
REPEAT BREAK
[3]
press CASH; at the next field don't enter a value, just press CASH.
MODE screen.
0
0.21
1.41
ST
TAX AMOUNT' field
Program Mode Programming • 161