Table of Contents
Advertisement
Options - Reference Information
SYSTEM Options
Option
BEEPER ACTIVE
1
CLERK ENTRY
2
CLERK IS
3
DECIMAL PLACE
4
DATE FORMAT IS
5
DESC. PGM METHOD
6
DRAWER MUST BE
7
SHUT TO SALE
ACTIVATE OPEN
8
DRAWER ALARM
DRAWER OPEN TIME (0-
9
99)
ALLOW POST TENDER
10
OPEN DRAWER ON
11
POST TENDER
GLOBAL ENTRY LIMIT
12
(0-14)
ALLOW MULPTIPLE
13
RECEIPT
DEACTIVATE SPLIT
14
PRICING
142 • Program Mode Programming
Entry
Description
Y or N
Select N for a silent keyboard.
Select PUSH for a push button clerk, select CODE for a
PUSH,
code entry clerk system (number - clerk or clerk - number
CODE
- clerk) sequence.
STAY DOWN,
Select Y for pop-up clerks, select N for stay down clerks.
With pop-up clerks, you must sign on for each transaction.
POP-UP
With stay down clerks, the same clerk remains signed on
until sign off.
Enter a digit to place the decimal point the selected
0-3
number of positions from the right.
MMDDYY,
Select date printing format.
DDMMYY,
YYMMDD
OVERLAY,
When OVERLAY TYPE, program descriptors by pressing
the appropriate key on the program overlay. When CODE
CODE
TYPE, program descriptors by typing the code for each
descriptor character.
Y or N
Select Y to enforce closed drawer for register operations.
Y or N
Select Y if you want the error tone to automatically sound
when the drawer stays open longer than the time set in the
following field.
0-99
If you enable the open drawer alarm above, you can set
the length of time (1-99 seconds) before the alarm sounds.
Select Y to allow re-tendering should a second change
Y or N
calculation be necessary. Re-enter the tendered amount
and press the CASH key to show the new change
computation.
Y or N
If you enable post tendering, select N to not open the cash
drawer after the second tender.
0-14
Enter a digit to determine the number of numeric digits
that can be entered for any register function. Enter 0 for
no limit.
Set to Y if you wish to issue more than one copy of a
Y or N
transaction receipt.
Y or N
If N, both multiplication and split pricing calculations can
be done with the X/TIME key. If Y, only multiplication
can be done with the X/TIME key.
Sam4s ER-260EJ/256EJ OP Manual v1.20
Advertisement
Table of Contents
