Table of Contents
Advertisement
CHECK ENDORSEMENT Key Function Options
Option
1
DESC
2
KEY DISABLE
3
UNDER
MANAGER
CONTROL
PRINT CHECK
4
AMT IN THE
ENDORSEMENT
5
PRINT DATE
6
PRINT TIME
7
PRINT CLERK
8
PRINT
CONSECUTIVE
No
SLIP OUTPUT
9
PORT#(0-2)
130 • Program Mode Programming
Entry
Description
Alpha
You can program a unique descriptor. The default descriptor
numeric
is CHKENDOR.
24 character
Y or N
Select Y to disable this function.
Y or N
Select Y if you do not want to allow the operator use of this
function in REGISTER MODE. When selected, the
function is allowed only in the MANAGER MODE.
Choose Y to print the amount of check as well as the
Y or N
endorsement message. Choose N to print only the
endorsement message.
Note: A 10-line check endorsement message may be
programmed. See "Endorsement" on page 164 for more
information.
Y or N
Select N to suppress printing Date on the check endorsement.
Y or N
Select N to suppress printing Time on the check endorsement.
Y or N
Select N to suppress printing the Clerk name on the check
endorsement.
Y or N
Select N to suppress printing the Consecutive number on the
check endorsement.
If validation is used, identify the communications port (1 or
0-3
3) where the validating printer is attached. Enter 0 if
validation is not used.
Sam4s ER-260EJ/256EJ OP Manual v1.20
Advertisement
Table of Contents
