Table of Contents
Advertisement
Option
CHECK CHANGE LIMIT
38
TARE WEIGHT
39
TARE1
TARE2
TARE3
TARE4
TARE5
MACHINE NO.
40
MODE P/W
41
LANGUAGE SELECT
42
USE RECEIPT AS
43
DETAIL
NOT INCREASE RCPT#
44
AT CLK IN/OUT
EFT DRAFT
45
MSR CONNECT
46
PIN PAD TYPE
47
PIN PAD PORT
48
COPY OF DATATRAN
49
RECEIPT
MARK CARD No ON ALL
50
EFT DRAFTS
Sam4s ER-260EJ/256EJ OP Manual v1.20
Entry
Description
8 DIGIT
Use this program to set the maximum amount of cash that
can be returned when a check is tendered for an amount
greater than the amount of the sale. For example: if the
check change limit is $10.00 the maximum amount that
can be tendered into the check key on a $5.00 sale is
$15.00.
4 DIGIT
A tare is the amount of weight representing the container,
or package when items are sold by weight. You can pre-
program five tare weights, representing the weight of
different containers. When you place an item and a
container on an optional scale, you can enter the tare
number to automatically subtract the pre-programmed tare
weight. If you choose to use tare #5 for manual tare
weight entry, do not enter a weight for tare #5.
5 DIGIT
The machine number is printed on the register receipt.
Program a machine number so that any receipt can be
identified with the store or register where the transaction
took place.
6 DIGIT
If you wish to use mode password, you must program a
password that you will use to enter X mode, Z mode,
PROGRAM (P) mode and SERVICE (S) mode. The
password may be up to 6 digits. (Used with option 33)
ENGLISH
Descriptors for menus, system and options can be
converted to the selected language automatically.
SPANISH
Descriptors for Reports, PLU's, Groups, etc. are not
FRENCH
converted. Those descriptors can be changed only by user
programming.
Select Y if you wish to print sale receipt as detail printer
Y or N
format (journal printer). If Y you can program some
options of DETAIL PRINT option.
Y or N
Select Y if you do not wish to increase the receipt number
(counter) when signing on or off a clerk.
DATATRAN
Select if the EFT draft is fine dining. Fine dining draft will
print a tip line. Select Datatran to not print tip line.
FINE DINING
DATATRAN
Select if the card reader is connected to the Datatran
device or the PDC
PDC
DUKPT
Always choose pin pad type as DUKPT.
ROTAT
0-3
Select the port# where Pin-Pad is connected
0-99
Set desired number of EFT receipts to print (0-99)
(default = 1)
Y or N
Set to N to NOT print card number on EFT receipts.
Program Mode Programming • 145
Advertisement
Table of Contents
